-
350W 12V 29A switching power supply for LED Light Strip, CNC, 3d printer. This power supply can be used with Kossel, RepRap, Mendel, MendelMax, Delta 3D printers.
Model S-350-12 DC Output Voltage 12V Output voltage tolerance ±1% Rated output current 29A Output current range 0-29A Wave and noise 150mVp-p Inlet stability ±0.5% Load stability ±0.5% DC Output Power 348W Efficiency 74% Adjustable range for DC voltage ±10% AC input voltage range 90-132VAC/180-264V AC selected by switch 47-63Hz; 254-370VDC Input current 6.5A/115V AC 4A/230V AC AC inrush current Cold start current 25A/115V 50A/230V Leakage current less than 3.5mA/240V AC Overload protection 105%-150% Shut off current,automatically restore Over voltage protection 115%-135% of output voltage Temperature Coefficient ±0.03%/centigrade(0-50centigrade) Setup/Rise/Hold up time 200ms,100ms,20ms Vibration 10-500Hz,2G 10min/Cycle,X,Y,Z-axis each 60 minutes Withstand voltage Input and output internal:1.5KVAC,input and enclosure:1.5KVAC,output and enclosure:0.5KVAC Isolation resistance Input and output internal,input and enclosure,output and enclosure:500VDC/100MΩ Working temperature and humidity -10-60centigrade,20%-90%RH Store temperature and humidity -20-85centigrade,10%-95%RH Weight 1150g For more information please you check 350W Signle Out Power Supply
-
by Dennis MingDate Added: 05/10/2016Perfectly for prusa i3.by William PowellDate Added: 05/02/2016Pretty strong power supply, good quality!by Edward CarlsonDate Added: 03/22/2016It worked great!by Erik SanchezDate Added: 03/16/2016Good quality power supply!by Dane FordDate Added: 03/06/2016It works well on my 3d printer, I recommend this power supply for 3d printers.
Switching Power Supply S-350-12V 29A for 3D Printer
$30.00
Customers who bought this product also purchased... |