OUT OF STOCK
Switching Power Supply S-350-12V 29A for 3D Printer
$30.00
Out of stock
Description
350W 12V 29A switching power supply for LED Light Strip, CNC, 3d printer. This power supply can be used with Kossel, RepRap, Mendel, MendelMax, Delta 3D printers.
| Model | S-350-12 |
| DC Output Voltage | 12V |
| Output voltage tolerance | ±1% |
| Rated output current | 29A |
| Output current range | 0-29A |
| Wave and noise | 150mVp-p |
| Inlet stability | ±0.5% |
| Load stability | ±0.5% |
| DC Output Power | 348W |
| Efficiency | 74% |
| Adjustable range for DC voltage | ±10% |
| AC input voltage range | 90-132VAC/180-264V AC selected by switch 47-63Hz; 254-370VDC |
| Input current | 6.5A/115V AC 4A/230V AC |
| AC inrush current | Cold start current 25A/115V 50A/230V |
| Leakage current | less than 3.5mA/240V AC |
| Overload protection | 105%-150% Shut off current,automatically restore |
| Over voltage protection | 115%-135% of output voltage |
| Temperature Coefficient | ±0.03%/centigrade(0-50centigrade) |
| Setup/Rise/Hold up time | 200ms,100ms,20ms |
| Vibration | 10-500Hz,2G 10min/Cycle,X,Y,Z-axis each 60 minutes |
| Withstand voltage | Input and output internal:1.5KVAC,input and enclosure:1.5KVAC,output and enclosure:0.5KVAC |
| Isolation resistance | Input and output internal,input and enclosure,output and enclosure:500VDC/100MΩ |
| Working temperature and humidity | -10-60centigrade,20%-90%RH |
| Store temperature and humidity | -20-85centigrade,10%-95%RH |
| Weight | 1150g |
Additional information
| Weight | 1.2 kg |
|---|
Be the first to review “Switching Power Supply S-350-12V 29A for 3D Printer”
Reviews
There are no reviews yet.