No products in the cart.
Description
350W 24V Switching Power Supply S-350-24V 14.6A for LED Light Strip, CNC, 3d printer. This power supply can be used with Kossel, RepRap, Mendel, MendelMax, Delta 3D printers.
Model | S-350-24 |
DC Output Voltage | 24V |
Output voltage tolerance | ±1% |
Rated output current | 14.6A |
Output current range | 0-14.6A |
Wave and noise | 150mVp-p |
Inlet stability | ±0.5% |
Load stability | ±0.5% |
DC Output Power | 350.4W |
Efficiency | 81% |
Adjustable range for DC voltage | ±10% |
AC input voltage range | 90-132VAC/180-264V AC selected by switch 47-63Hz; 254-370VDC |
Input current | 6.5A/115V AC 4A/230V AC |
AC inrush current | Cold start current 25A/115V 50A/230V |
Leakage current | less than 3.5mA/240V AC |
Overload protection | 105%-150% Shut off current,automatically restore |
Over voltage protection | 115%-135% of output voltage |
Temperature Coefficient | ±0.03%/centigrade(0-50centigrade) |
Setup/Rise/Hold up time | 200ms,100ms,20ms |
Vibration | 10-500Hz,2G 10min/Cycle,X,Y,Z-axis each 60 minutes |
Withstand voltage | Input and output internal:1.5KVAC,input and enclosure:1.5KVAC,output and enclosure:0.5KVAC |
Isolation resistance | Input and output internal,input and enclosure,output and enclosure:500VDC/100MΩ |
Working temperature and humidity | -10-60centigrade,20%-90%RH |
Store temperature and humidity | -20-85centigrade,10%-95%RH |
Weight | 1150g |
Additional information
Weight | 1.2 kg |
---|
Reviews
There are no reviews yet.